Index > Products
420 Ball Mount Tooling

420 Ball Mount Tooling

  • Cater for both normal & large substrate (Up to 300mm X 100 mm substrate ; Ball placement area 290mmx 95mm)
  • Capable to handle super small ball size (0.1mm) and pitch (0.2mm)
  • Capable to handle up to 150K ball at a single placement
  • No pick ball, using rock and fill ball to increase the ball count up to ∞ ( the ball count is subject to the substrate size)
  • No pick ball, no missing ball
  • No flux pin, template , using stencil to shorten the lead time and reduce the tooling cost
  • No ball bin to handle to down to 0.1mm ball size
  • Press module to conquer warpage
  • Optional 8K PMI capable to identify 0.03mm ball size differential
  • Optional SECS-GEM available
項目 內容 單位規格
Carrier Length min 150min ~ max 325mm
Width min 50min ~ max 170mm
Placement area (Length) max 320mm
Placement area (Width) max 130mm
Thickness min 1mm ~ max 8mm
Ball size min 0.30mm ~ 0.76mm and above
Ball Pitch min 0.50mm ~ 1.50mm and above
Substrate Length min 150min ~ max 300mm
Width min 50min ~ max 100mm
Placement area (Length) min 140mm ~ max 290mm
Placement area (Width) min 45mm ~ max 95mm
Thickness min 0.5mm ~ max 2mm
Ball size min 0.15mm ~ 0.76mm and above
Ball Pitch min 0.30mm ~ 1.50mm and above
Achievable number of balls per mount cycle 60,000 balls
PMI resolution 0.020mm/pixel (Option 0.014mm/pixel)
Vision accuracy +-0.03mm@3sigma
Ball placement accuracy 1/3 ball offset